Merchant and Mills Trapeze dress

Some ironies with this project. I compared it to the Camber set *at length*, (it is quite different!), made a muslin of the top, did a shoulder widening adjustment, and then realised my amazing fabric had so much stretch that I would be better off with the narrower shoulder.  Then I applied the pattern to my fabric and determined that even shortening the dress 6'' there was no way it fit on 1.5 meters of fabric...

So I ended up, after these labors, cutting the normal pattern, size 10, with no changes, from some Marc Jacobs charmeuse that I had lying around and was tired of looking at.  The charmeuse created most of the challenges here.  I french seamed the sides and shoulders, applied the facing, which then of course refused to lie flat, and then the sleeves, with really little trouble (I stopped french seaming by then, too much trouble for the sleeves.)  There is a funny little sleeve insert which required a bit of effort (and is my favourite part!)  Overall this is such a shapeless, floppy kind of dress that I doubt the relevance of any small irregularities caused by my charmeuse slipping away from me. Or maybe the IDT was doing its job.

Hemmed the rest of about 7'' off the length. I don't love hemming so my technique is to spend as little time on it as possible.  This time it worked out.  The wide hem and the wide sleeve hems match, and although on certain spots my stitching is not totally straight that was me, not my machine.

This was fun.  It could be done in one evening. I think the facings suck because they always do and I would never use them again.  This one could easily accept a bias tape finish.  The result is...sort of cool in a hippie way.  Maybe I'll find somewhere to wear it and then feel like it's totally me, but I am not used to having so much fabric between the bust and hem.  I think it can be quite flattering, and the silk because it keeps sticking to me, then flowing away, creates very nice movement, but just a bit of me wonders if it's too middle aged lady? Pregnant lady?  Trying to hide something lady?  Not sure yet. I wore it to dinner with my friends (hence change of scenery photos!) and they reckoned it looked very sophisticated so it can't be too bad but I'm on the fence as to whether it goes in my 'keep' pile or my 'friends' pile.

Deer and Doe Chataigne trousers

So who needs shorts when we could make pants?  My idea for this came from the snug fit at the waist.  I envisioned hippie era pants that are snug at the waist, and sort of billowy to the ankles.  To create the billow effect I though I might tie strings at the ankles so they could be long but not drag on the ground.

Also, this fabric.  This is from Emma's Sewing Basket in Seattle.  I got the end of the roll.  It's a hemp blend - either hemp wool or hemp poly, and it has a great soft feel, drape, and I love the pink and brown!  I have been considering it for every project and getting frustrated!  I realised a bit too late that it is also itchy.  

I cut a size 38.  I measured the inseam and opening width of the pants I was wearing at the time, which were boot cut jeans.  I just eyed it as I cut.  I figured I would have to adjust after sewing.  The waist was just right, although I wouldn't have minded one size smaller.  I had to do some adjusting at the crotch curve, but not a lot. Unfortunately the leg shape is kind of ugly.  I guess this is what happens when you don't know how to draft anything. 

I wonder now if there is a right way to cut pant legs.  I know a straight line is supposed to go down the front of the trouser leg over the knee.  I suspect I cut the legs wrong and I wonder if they will twist as a result.  Another thing to learn about drafting, someday.  It always becomes more relevant after you try it : )

So I got most of the way through these pants and then became demoralised because they were...a little too hippie even. Not to mention just a bit big at the waist, and they had to be properly fitted to work.  They sat for a week while I sifted through some other fast-fashion projects.  (Really, lately, I know, I'm on a low-quality binge.)  And then something amazing happened: my friend Mirjana entered the scene and announced that she had been looking everywhere for baggy hippie pants!  She is the same size as me, although as always with curves in slightly different places, so she came out well while digging through my recent makes, walking away with my Waffle vest and with the Camber Set as well (ends up it just needed a proper set of boobs and it looks amazing!)

So I was sparked to finish them.  I ended up taking in about 3cm at center back, with a not very skilled taper, and a tiny bit at the sides.  I finished them with a normal hem.  Mirjana is happy and so am I.

Vogue 1247 Top

During a cutting binge last week I suddenly put this fabric together with this pattern.  I have been planning to make the skirt, but the shirt gets surprising reviews (initially I wasn't interested at all...foreshadowing?)

The fabric is one of my favourites.  It is a light silk-cotton that I spotted in Wellington at The Fabric Store, but didn't buy it since I was about to move.  I was very sad about that and thought about it.  Aaaand!  One year later at the Fabric Store in LA I found it!  I only got a meter, another problem of mine...I managed to squeeze the pattern onto it by cutting a size 6.

Vogue size 6: I have never made a Vogue size 6 in my life and I suspect I never will again.  This top is so baggy that I thought I'd have enough room in it even in a size or two smaller than usual.  For reference, I generally fit into a Vogue 10 and occasionally into an 8.

I was hoping that by being exacting with the french seams, that things would magically fit together.  They didn't - from the very first piece.  When I sewed the first center front and side together, I was really puzzled why there was about 3 extra cm at the top of the side piece.  The answer is that there shouldn't be...and that got things slightly offset from the beginning.  I didn't find it exactly difficult to sew, but I think that once you have done one step slightly off, it's impossible to recover because there isn't a lot of adjustment room elsewhere.

That bust dart?  It's like, outside my shoulder.

But that's ok!  Because in the end, the top is COMPLETELY HIDEOUS. There is no fixing this problem.  I look like a pregnant linebacker.  Why do the bust darts end 3 inches out from the bust?  I can find nothing flattering about this top.  I had to force myself to hem it, since it was clearly a lost cause.  The silk-cotton is a good fabric for the pattern, so I don't think its lack of drape is to blame.  I can't imagine the shirt looking better if it were *bigger*.  Overall I am mystified how it suits other people so well!  

Tilly Delphine skirt

So I am on a skirt binge.  (You didn't notice yet, it's happening behind the scenes.)
This is skirt number 2.

The fabric is an Art Gallery print that I love.  Unfortunately the etsy seller was less than generous, sending me 40'' width fabric.  It was nearly impossible to cut the skirt out, and I had to shorten it extra.  I think 3'' total (which is fine).  No chance for pattern matching of any kind.  Of all my charmeuse collection I finally settled on grey to line this.  Maybe I should have gone with red?

Size: 3, based on the waist of the measured pieces and where I wanted it to sit on my waist.  I went less by the size chart and more by the actual waistband pattern piece.

I followed Tilly's online tutorial to line the skirt, as it's a bit different than how I lined the Burda skirt.  You essentially make two skirts and then slide the lining into the main, and sew them together.  Genius!  I had to save the hemming for last since I wasn't sure what my actual final length was.  (Each piece was cut a different length due to fabric shortage!)

The funny edge on the pattern pieces creates this stark angle

Funny edge on the bottom pieces, difficult to line up as well, necessary for shape??

You can see here that it hits at my actual waist, which I find very unflattering.

My issues with this skirt:
1. The waistband, ugh, I mean, if I had made a size bigger, it would sit lower, and might be better.  If the waistband were half as wide it would be bigger.  If the waistband were curved it might look better.  But as it is, this skirt, out of 2, is in place number 2 behind the horses.  I suspect when I wear it in real life it will ride up and I will be tugging it down forever.

2. What's up with the 5/8 inch angled seam allowances?  They were difficult to sew, and they mean that the skirt has a funny bend at that spot.  I feel like this is bad drafting, or like, overdrafting somehow - it gives the impression of being well-thought out, while actually being worse for the final result.  But I don't know enough about this stuff - is that necessary for the A-line shape of the shirt?

Anyway an easy project and I do like it.  It will need to be worn for me to determine how much, though.  One option would be to make it without the waistband.  Still a few skirts to go before I pick a grand prize winner...