By Hand London Zeena dress in upcycled Marimekko flowers

I planned to make this dress when I was in Ukraine, but somehow I lost the traced skirt piece and that put it on the back burner.  There are always many fun dress patterns to try out...

Finally I decided it was time.  I used a Marimekko sheet that I found at the Goodwill in Seattle. 
This dress is not lined, uses a facing, and has pleats to create the structure.  I didn't shorten it because it's meant to be very short for BHL - I just used about a 2 inch hem to shorten it somewhat.  I used size 6/10 which is my general size in BHL. 

I found nothing difficult in the tracing, cutting process.  I knew ahead of time that I would hate the facing, but I also hate making bias tape.  Unfortunately I should know better.  I really hate facings. 

I didn't do a lot of careful details with this because it was pretty primarily a muslin to see what I thought, although I did pay attention to the flowers not to have them in inappropriate places, or repeating oddly.  My Mum thinks it's cute but I don't like it at all.  The waist bothers me.  I really need to do an adjustment to the back to remove the extra fabric.  The pleats don't please me.  The fit is acceptable even without a swayback adjustment, but the style feels too cute.

As for the bad photos, my Mum needed cataract surgery and couldn't focus so I reckon they were still impressively good : )  (She's had it now and is doing great.)

Luckily I have enough left in this sheet to make something else, like a nice Willow tank! 

By Hand London Kim No. 2

After I finished my first Kim (which you can see here), I applied a few small changes to the already-cut out Kim 2.  I narrowed the bodice top by slicing a tiny piece off the sides of the center bodice piece, bringing the straps in closer and decreasing the space for the bust.  And I cut off 4 cm from the straps - mostly off the front.  And this time it's the normal length, ie only shortened 6" and not 12".  I did not think too hard about whether the armhole would be too small and in the end got lucky - I would have cut out a bit of the front of the armscye if I had remembered...but you will notice that I did all this a long time ago.  You will notice that I said rather prophetically that I hoped Kim no. 2 wouldn't take as long as Kim no. 1, and that I wrote about it almost exactly a year ago!

Well, I left these cut out pieces while I lived in New Zealand and Nepal, and have been sewing up my neglected WIPs all holidays as I wait for various visas.  It took me 1.5 days to sew up Kim no. 2, in between other things.  Those tucks are really exhausting, and it seems I just can't do tucks, gathering *and* a zip all in the same day.

So, Kim 2 fits fine.  The bust is better, but I have shrunk so there's still some space in it.  The armscye is too small due to how much I took off the straps, but the straps are no longer too long.  And the skirt is the "correct" length.  It dwarfs me - I feel pretty ridiculous in this poofy dress.  I think the removal of 1 foot of the skirt length was the best choice for me.

I was really thrilled by the Kim pattern because my first one fit crazy well.  I do feel kind of ridiculous when I wear it - it's the only thing I own with a gathered skirt.  So Kim 2 just feels like too much.  I do like the bodice, but I think I like the Elisalex bodice more.  I still want to do some Frankendresses but I am no longer so convinced this is going to play a part.  But if I keep working at this pace at least I'll finally get my first Zeena dress finished soon!!

By Hand London Elisalex in French flowers

I first tried to sew an Elisalex during the year I was learning to sew.  I went for the version with sleeves and sized up to the 8/12.  It was awful and I was never able to salvage that dress.

I became more interested when I saw that By Hand London had released a revised version of the dress, with improvements for the sleeveless version and a bit less tulip in the skirt.  Since my original version was on paper, I emailed them and very shortly received the updates as a pdf.

This time I went sleeveless, 6/10.  I removed about 8" of the skirt pattern - 1 entire sheet of paper in length.  The fabric is cotton with a brushed feel, which I got in Paris a few years ago.  It is beautiful fabric although I tend to avoid too much in the way of flowers, and I thought it had stretch and was going to make a Morris with it ages ago, but alas, it doesn't.  So it is an Elisalex instead!

I noticed the irritating mirror pattern across the butt quite awhile after I made this dress, which must be a sign of how much I love it.

The pattern is straightforward.  I had no problems with it.
And then came the real shock - this dress fits.  Like for real fits.  This is amazing.  I made no changes and the straps aren't too long and the bust isn't puffy.

No effort, magic dress.  I'm in love and I already have a version planned involving lemons.  (Who doesn't, these days?)  I hope I will have enough time to make it before I move! (Update: no chance.  See you next year...)
 

By Hand London Kim dress

I suffered with the BHL Elisalex due to fit problems and honestly, the Kim pattern isn't that much different.  Initially I only noticed the purple version with the tulip skirt and so it didn't go on my radar at all.  But I started to see a number of versions this year that had me fixated on it.  Plus I really wanted to do a Kim-Zeena frankendress.  So I started with a Kim.  It was a Kim marathon actually - my last day in Seattle and I spent the evening trying in vain to sew the entire dress.  It was near midnight when I had to stop prior to zipper insertion. 

Putting in zips late at night and tired is never a good idea.  Also I could finally see the dress coming together, and to my total shock, it seemed to fit like magic.  No WAY!! 

The details:
Fabric is from Tessuti in Melbourne. And I have had it for awhile.
Lining is lime green bemberg.  The skirt is not lined.
Size is 6/10 with no changes. Oh yeah except one.  I prepared the pdf pattern in Ukraine, and I think that I cut some length off the skirt prophylactically, since BHL patterns are for very tall ladies.  I think I cut off like 6" or 10 cm.  And then...when I cut out the dress, I forgot I'd done that and again removed about 5"!!  I held it up to myself and neglected to take the little pintucks into consideration.  So I was looking at the need for a hem facing. 

So I moved, and I couldn't bring incomplete Kim with me due to the usual luggage mess, and it was so tantalising because it looked like it might be my dream dress in terms of the fit.  So I concocted another Kim in my head while I waited for my mum to send me my boxes of sewing supplies/unfinished projects.  (Which naturally arrived before I got around to the second Kim, oh well.) I got a grosgrain ribbon in Munich to use as a hem facing and finally got moving on the last, hm, hour of labor on this beautiful dress. 

No problems with the finish, and I think I might continue to use ribbons as hem bindings - I read that it will stick to tights less!  And it means my hem is even!  Hurrah!  However, when I got to pinning the lining down, I realized I would have to sew it by hand or it would make the dress bunch out funny.  Also, although it almost fit perfectly, the straps were too long.  Like, really too long.  So I realized after alllll this work, I was going to have to open the shoulder seam and cut it and then blind stitch it back together.  Blah.  This dress has been lying on my couch for SO long. 

I took a few vacations to gird myself. 
Finally I think I was tired of seeing it sitting there and so I finished it - I hand sewed the lining to the bodice.  To make the shoulder strap shorter I opened the seam...and just overlapped and sewed them down.  Design feature!  Yeah...it's not perfect but at this point enough is enough, right? 

Sorry my photos are blurry, I have discovered that with my remote I can do an endless series of pictures but I haven't gotten the focus to work yet.  This does mean you'll have to bear with endless ridiculous poses but it was so much more fun than the usual photo shoot.


I have already cut the second one out so in order to get around these fit problems, I decided to just cut the straps (about 3 cm), and to cut a sliver off both the front and back bodice piece, tapering down to nothing below the bust.  This would bring the straps closer together and shrink the bust a tiny bit.  We shall see...hopefully it won't take quite as long as the first one.

By Hand London Anna, version 4

With version 4 I think I'm finally tired of working on Anna.  This version was supposed to be the summary of everything I learnt: V-neck is better, size 6/10 is better, lined is better, and short is better.  Plus pockets!

Fabric: silk-cotton blend from emmaonesock, lined with Bemberg.
Zip: too short, more on that later.
Technique: Did everything for each bodice, then sewed the neck and sleeves together.  Understitched, and the pulled it through, and sewed the sides shut.  I added the skirts after that, then the zip using the Cambie method of applying it to the outside, then sewing the lining to the zip tape in between the layers.

Honestly, it was a straightforward make...

The caveats:
-The lining changes the way the sleeves and neck drape.
-Because of the lining, I forgot to take that v-chunk out of the middle back, and so it slides off my (broad) shoulders in an unflattering way. I look like a pear!
-I didn't make any attempt at pattern matching and I'm disappointed in the results. 

I have made this so many times but I was never able to assess whether I just simply *liked the style.*  I do like the pleats in the bodice, but I think a big part of my trouble fitting the dress is that I hate how tight it is on the upper abdomen in order to create this effect.  I guess that's an area I don't like to have emphasised.  My first Anna was the most creative, and in some ways still my favourite even though I couldn't breathe in it.  (I gave it away, and sort of wish I hadn't. Who cares about breathing?)  The third Anna, my first v-neck, was the one that fit the best but I gave it away when I moved because I was too lazy to cut the skirt off.  The length was too much for me.  (Hm, sort of wish I kept that too, sigh.)

Sorry for photo overload, I tried to get some with hands in pockets and some without, but I look like a zombie despite my best efforts. 

As for the zip: I just happened to choose the shorter instead of the longer zip.  It goes about 2 inches past the waist seam.  Because of it I can barely get into the dress, it gets hung up on my shoulders.  I'm still trying to debate whether to fix it or give it away.

This project has made me think about the comparative joys of sewing things I planned a year ago (when I could have worn this dress) versus now (when I am unlikely to keep things I don't need due to space constraints.)  The projects planned awhile ago don't have much sense now, and as a result I don't put the same effort into them.  I tend to assign a pattern to a fabric and then write it in a list, where it becomes fixed - lately I've been attempting to undo the list and reflect on whether I actually want the item that might result - and take things off the list if the answer is no.

By Hand London Georgia dress

This wasn't a pattern I jumped on but my interest rose when I saw Ladybird's version - short!  And of course I saw it on Lizzy in person, and hers was fabulous.  During my perambulations around the city, I found some stretch twill on sale and it seemed just the thing for a simple dress that wouldn't require too much equipment.  I wasn't exactly enthralled by the idea of hand sewing the entire thing, but I suppose it could be done... (nah, there's got to be a sewing machine I can borrow somewhere, right?)

Since I had so much time to think about it, I thought about the bust, and about my history with BHL bust problems.  I thought maybe I should do an FBA.  I bought a pair of shorts to rip up and - crazy! - muslin the bodice!!!  Before I did that I read the sewalong that the lovely ladies at BHL have done.  They advise that an FBA is needed when the high bust is >2 inches smaller than the bust, because that would correspond to a C-cup.  Hm....wait a second.  My big problem is that my high bust is 1+ inches greater than my bust, although some of that is because of my back muscles.  So should I actually be doing a SBA? I decided to be smart and just muslin the normal pattern.

normal size

I can easily pinch out an inch

SBA of about 1 cm, I only pinned it, but it's much smoother and fits more closely

There is still a bit of excess, but it's less.

This is what I got, see top photos (after I hand sewed my first muslin like a good 14th century frau).  Empty pointing boobies...I guess I do need that SBA, although I'm not sure what happens at the bottom of the cups where they attach to the dress.  Because I didn't totally believe in it, I shrunk it by only 1 cm.  And because I was getting lazy, I just pinned it instead of sewing it.  But already I can see a huge difference - the bodice lies flat against my chest and there are no empty cups.  I can also see that I might have gaping at the top of the bodice, but that will be easy to fix by just sewing a bigger allowance at the top of the centre front.  After all this, I also think I better find a sewing machine, because my stitches don't look very reliable to me, but at least I can get on with cutting before my flatmate comes home and needs the living room floor.  (Yeah!  And the iron is in the basement!)

This is more true to the actual colours.  My camera hates purple, apparently.

I found construction to be straightforward, although I had slight trouble with the centre back point.  The front was off but even after taking out about a 1cm wedge from the centre top front, it still gaped, so I gathered it there, similar to what Lizzy did on hers.  Then you can't see my slightly off-kilter centre.  Compensation came later: no zip!  Since this is a shoulder-free dress and my fabric is very stretchy, I didn't need it.  Hurrah!

I did as suggested by others and tried the dress on inside out.  My heavy fabric doesn't show marks, so I drew lines down the side to flatten out the extreme-hip shape (my hips are low?)  I considered pulling in the back a bit too but I didn't want to overdo the changes.  Because I know that I have a short strap-distance, I planned ahead and left the back straps out.  Once I tried on the dress, I inserted them into their holes and sewed these shut.  I wasn't bothered by having sewing marks on the back of the dress, although I could also have sewn it on the inside as you do for the Sewaholic Cambie.

I cut a 6/10.  This is my usual size for BHL.
I still don't know if the SBA mattered at all.  The bust fits ok.  But the bottom of the bust is high.

A finishing touch - the BHL label!  None of my previous patterns came with the labels so I suffered from envy of everyone else with their amazing labelled By Hand London projects.  Now I finally have one of my own!

I think this dress, because I worked on it so slowly and attentively, has come together much better than my rushed projects in the past.  I put a lot of effort into what I personally needed so that I would consider this a "wearable" dress, and that truly makes a big difference and is something that you don't learn right away.  In some ways it was also a more enjoyable process because I didn't rush.  

By Hand London Polly 2

For my second Polly top I had so many awesome scraps I wanted to use that it was hard to choose the best ones.  Finally I settled for the silk-linen that was leftover from my Lisette Jacket as I adored the drape of it, and I paired it with the never-ending silk that was my Victoria Blazer lining (and my Papercut Saiph!)

I used a size US 6.  I took 1 inch from the centre front and about 1 inch from the top of the shoulders.  I cut about 2 inches off the bottom.  French seamed, and in order to show off the very cool selvedges I left the back open at the bottom since I didn't have enough fabric to cut it on the fold.  That also helps get it on without a zip.

I adore my new Polly top!  The fit is magical and actually the horseshoe front went in more easily this time as both my fabrics had just enough give.  Unfortunately this was the project that got shunted to the very end so I was sewing my bindings with the wrong coloured thread and it shows some on the front...

Photo update!  Thanks Mum!