Deer and Doe Safran pants

I was really excited about these pants.
I got stretchy fabric from emmaonesock, which was nice because I knew the % stretch was the right amount.
I read a lot of reviews, including how to make various adjustments.  The pattern itself comes with suggestions for adjustments to make.
I made an (unnecessary) adjustment (I seem to do this a lot to pants patterns...).

I made a size 38 going by the measurements chart.  It's possible, with such stretchy fabric, that I should have gone down a size.  Waist 27, hips 37.

I cut the pants out and then a lot of life got in the way and although I'd been so excited to make them and WEAR THEM right now now, it didn't happen and I had to kind of regain my enthusiasm.  Which was hard.

I love Deer & Doe and I think slowly I'm making nearly every pattern they have put out.  But this one, as far as I'm concerned, is a loser, and I don't recommend it.

Everyone complained about the kind of reverse-mitre of the pockets.  The instructions aren't clear on how many layers to sew, and I think even when you sew the layers correctly, it is very difficult to get a clean corner on the pocket.  It's not worth the pain.  I do like this pocket shape in theory but I think the only way to salvage the pattern is to not use them, unless you are willing to muslin just the pockets until you get a technique that works reliably.

Next, the fly instructions and the fly pieces for the front zip confused me.  I never got this straight.  My zip is really visible, because I have no idea how to do it otherwise.  I reviewed the fly instructions from Lauren's Thurlow sewalong, which has saved me many a time, and while it did help to straighten out which pieces belong to what, a (theoretically) invisible front zip without the fronts overlapping seems impossible. And that seemed like what the pattern wanted me to do.

Plus the butt increase that I added was totally unnecessary.  I don't like the shape of the butt, it's way too flat and baggy, and I don't think my small (a few mm) increase is entirely at fault.  The waist is also really truly a high waist, and it's a bit exaggerated for me.  I like a high waist, but I'm not sure I like it this high, or that I like having such a long front zip.

I was so annoyed so I put in a snap rather than a button cause it was easier.  And actually I really like the snap!

Overall, this pattern could likely be salvaged by skipping the pockets and by totally ignoring the fly instructions and doing a fly per any other pattern, like the Thurlows or the Grainline Maritime shorts. (although you might need to cut slightly different pieces...).  The only reason to do this is if the fit of the legs is utterly bomber.

And yes, after these sat for awhile and I forgot the sewing trauma, I noted that although they aren't really that flattering, and my front zip is ridiculous, they are comfortable and the pockets are stretchy and useful.  The pants are so stretchy that I think they will stretch a lot and feel too big! 

looks better blurry...

And yes, that's a bonus Renfrew.  I thought I made it 2" shorter than the pattern but I think I might have mislabeled my pattern piece, and only shortened it one inch.  I'm going to make sure to shorten it another inch next time. 

Megan Nielsen Reef shorts

I bought the Reef pattern to make the top, but I had some of this fabric left over after making my Grainline Willow so I cut out the shorts (yes in August) on a whim.  However, I didn't have enough for the inside of the shorts hem pieces.  These two relatively small pieces literally held the process up for months, because the main fabric is a spongey, very drapey rayon woven, and I wanted something with the same fluidity.  Everything in my stash was sort of earmarked, and I wasn't sure I had enough yardage, so I waited.

I cut a size XS, and I didn't cut the pockets because I thought they would mess up the lie of the shorts, and anyway I don't need pockets in lounge shorts.

Finally after a possibly bad idea shopping spree online at Mood, I had fabric.  Enter the pale blue Rag & Bone stretch silk.  I'm not sure what I'm going to do with the rest of it - I'm thinking of making a two-layer Briar...

Easy to put together.  I used french seams on the sides and zig zags on the centers.  I did sew in the ditch for the waistband, very painstakingly, but I admit I'm finally flipping sides on this issue.  Sewing in the ditch invariably misses something.  I like it in theory - I mean, I like the action of sewing in the ditch, but the results are not very nice.  You can see the line of stitching, missed fabric on the inside, and it looks messy.  So I sewed the silk hems up by hand.

I can't say these are the classiest, or that they are the most flattering, but I quite like my haphazard pattern matching, I love the luxury of a bit of silk in there, and they are super comfortable.  Of course, they aren't exactly season-appropriate...and it looks like I'm planning an endless winter this year, so it may be awhile before they become season-appropriate...but they were amazing on my recent trip to Thailand!

Ironically I think I will get a lot more use out of this shorts pattern than I will out of the Reef top.  I'm still kind of puzzling how to improve that top for a wide back, and how to avoid the facings, but for now it seems like too much work to tackle.

Orange Lingerie Marlborough bra in brown

Once upon a time, I proclaimed that I had no UFOs.  Well, this is like, the ultimate in UFO-action: I cut it out in Switzerland and then carried it around for 1.5 years and now here we are.  So, I'm guessing by this bra that I made a 32C, and I hope that I made these changes which I have documented as necessary:

-tighten underarm elastic (I remembered, and did this)
-lower height of center bridge (it looks a tiny bit lower, maybe)
-sew the bottom elastic on a bit higher (done)

I thought I had wanted to remove a bit of fabric off the outer side of the powerbar, to make it not come up so high in the front of the armpit, but I guess I left that, in the hopes that tighter elastic would fit better.

However in all the excitement I lost my brown bra strapping, so in order to make it less muddy I went ahead and ordered teal- all my recent bra supplies have been from tailormadeshop, who I am in love with for their cute supplies and quick shipping.  I used teal thread too, which I knew was risky because when you can see everything, you can see the messes...

The bra came together pretty fast, and unlike in my first bra experience here, I underlined the lace cups with powernet.  This makes it feel like a real bra, it's substantial!  I didn't have any issues putting it together.

However, I made my own bridge (as previously) following the book Demystifying Bra Making, by Norma Loehr.  My bridge is narrow compared to average, and so I discovered that the wires overlapped.  I'm debating whether I could shorten the height of the bridge to use shorter wires, or whether I need that medial support.  I don't have much tissue on the top half of my breasts, so mainly I need the lateral support, and some of my RTW bras don't have high cups in the middle - something to consider for next time.

There is a lot of wrinkling in the upper cup - I could pinch out a centimeter of fabric - best seen in this view.

The sad end of this story is that a bra prepared two years ago doesn't fit today... It's comfortable but the cups are a little bit too big and I think the lace is scratchy.  I've probably lost just a bit of weight since then and of course my boobs are the first thing to shrink. I'm not totally sad, I know I'll fluctuate and fit this bra again, but I'll measure myself again before making my next attempt. 

Closet Case Patterns Sallie top & 2-layer Renfrew

This Sallie top is totally cobbled together out of scraps.  I adore this rayon and wish forever that I'd bought 12 meters instead of just 2.  I was struggling to find a pattern that I could use for it.  Trying to mix and match a bunch of different weights of jersey turns out looking very homemade, so I wanted to avoid that.  And luck had it - I couldn't make a Renfrew out of it because I would have had to use different sleeves and bindings.  But I could fit the two pieces of a Sallie out of it - and I had been musing on making a Sallie top.

I was going to upcycle a merino wool skirt for the lining but the skirt looked like loads of fabric...until I got cutting.  No matter how I turned things, I could only get one piece out of it, and was left with the conundrum - what could I put together with that?  I ended up using some black stretch silk left over from another project.  I knew it would be tighter and so I used that as the front.  It's also rather short but you can't tell.

I made the top as normal.  As you can see I didn't do anything so boring as cut the bottoms even, I just left them as the bottom of the fabric.  It's important when making this as a top to still sew that line of stitching along the bottom in order to hold the layers together - that is what keeps the neckline from rotating out.  My common denominator was the bottom of the silk, so I sewed at that level all the way around - but it wasn't done yet when I made these photos so that's why the lining peeks out a bit.

This was really an epic save.  I got a second top out of the best fabric ever and it's got a cozy silk and wool lining and I love the ragged bottom.  As you can see, since I carried that ragged theme over and made a two-layer Renfrew out of tissue weight jersey from Anna ka Bazaar:
 

 This fabric was meant to be a Sallie back when I bought it, but it was much more transparent than I expected so I set it aside.  Then I was going to make a Style Arc Kylie, but after looking at the pattern pieces I realized there was no way I had enough fabric.  (Reality doesn't seem to come into play when I buy patterns - I always assume I can somehow jigsaw all the pieces into any size fabric...)

The rule of tissue jersey is to touch it as little as possible.  It's nice not to do much finishing but the fabric is still a finicky pain to work with.

I used the standard size 4 Renfrew with a 2 inch shortening at the waist but the length is the length of my pattern pieces.  As you can see I didn't cut these even either.  I just put the shorter layer over the longer layer.  I sewed the shoulders together and the side seams separately.  The sleeves are elbow-length and are unfinished at the ends.  For this one I sewed the sleeve continuously with the underlayer and then sewed the overlayer separately.  I have varied which side I sew the sleeve with and I don't think it matters much.

I thought eventually I might cut the overlayer into something specific but for now I'm leaving it as is. 

Stepping stone cowl

I chose this project to make use of the yarn. When I bought my very first sweater yarn in Delft, I couldn't resist this yarn, but with all the moving, I didn't keep the label.  It's a pretty bulky yarn, and was recommended for size 11 US needles.  

I looked for a pattern that would be easy but would take advantage of the variegated colors of the yarn, and I found this cowl. It recommended size 12 US needles, but otherwise seemed to fit my specifications pretty well.  

I cast on using the size 12 needles and I thought that it was fine, so I carried on with them. Unfortunately, I cast on at work and wasn't paying attention when I put it into the round, so it had a twist in it that I didn't catch for about 7 rows.  I had to frog and start over.  

Other than that mishap it was an easy make.  One of the nurses at work really liked it so I gave it to her. 

Lady Renfrew/Skater-frew Frankendress

This fabric is from the market in Delft and it's consistently been in the wrong country while I dreamed about what to make with it.  The one thing I wanted was the stripes going down sleeves. For awhile I thought of doing a Named Geneva tee, but I made a bunch of them and was kind of tired of them so I lost interest and this kind of rayon - lightweight, but heavy, jersey, cool feeling - doesn't suit everything because it stretches so much.

Finally I decided to do a Lady Skater Renfrew frankendress. This has been done loads, but the most memorable to me is Lauren's.  It's the first time I used the cowl neck.  In order to combine the patterns, I applied all the neck stuff from the Renfrew onto the skater pattern.  They don't have the same seam allowances, but I honestly think I could have put the Renfrew cowl on the skater with no other changes, and it would not have looked much different.

Renfrew size 4.  Skater size 3.  It's my third skater with a third type of fabric and the same size, and it's interesting to me how each one is very different.  (Versions 1 and 2.) I thought I had way enough fabric with my two plus meters...so I was going crazy picking pieces of pattern...and then I got to the cowl.  The massive, fabric needy cowl.  Oops.  So I found a scrap of pale jersey to be the underside - I guess it's visible sometimes but luckily it matches really well and maybe it's kind of nice to break up the pattern a little bit.

I got worried halfway in that this fabric is too heavy to be a skater.  I didn't add the elastic at the waist because it is scratchy and I don't really understand how elastic in the seam allowance stabilizes the dress, anyway.  But.  Is this kind of dress doomed to drag downwards and fall apart?  How to avoid?  After wearing for one day I can see the stitches at the waist pulling. Does the elastic stop that from happening?

I don't know how much I like it.  I think it's cute but I kind of lost interest at some point.  I'm getting into moving phase again and I want to make make make (because travelling with fabric is heavy) but I don't really want to keep keep keep...